Heat Proofing

Heat Proofing:

MG Corporation: Offer you a water-based, high solids, acrylic latex elastomeric coating reducing the heat loading into a buildings up to 40%. This highly effective radiant barrier, heat reflecting roof coating paint is designed for maximum thermal efficiency, high reflectivity, ultra violet resistance and years of trouble free service. It is most versatile product for concrete roof / terrace applications for effective heat reflection and insulation.

Typical Applications:

Roofs & Terrace
Basements
Asbestos roofs
Aluminum Sheet Roofs
Warehouses
Corrosion Under Insulation (CUI)
Commercial Buildings
Sheds
Mobile Modular Homes
Weather resistant membrane
Wood & concrete
Air-Conditioned Building
Mobile Homes
Fabric embedded membrane
Refrigerated Cold storage Facilities

Surface Preparation :

Brush away loose contamination on the substrate to be coated.
Bio-wash for killing fungus where necessary
Roughen surfaces by wire brush manually.
All surfaces must be clean and free from laitance, dust, dirt, oil and grease.
Please check Moisture level and pHlevel in walls/roof/terrace/ceilings. The moisture levels should be below 12% and pH should be in the range 7-9.

heat proofing 03
Heat Proofing.docx 021

Product Application:

The surface should be moist/water wash before application. However avoid puddling/ponding of water.
Apply first coat with brush on the cleaned and washed surface.
Apply second coat after a gap of 1-2 Hours.
After completion of full coating, it should be allowed to cure for 24 hrs. Drying time may vary due to temperature / humidity and surface condition.
Ensure that the coated area does not come in contact with water for at least one hour.
Apply with a quality brush, or roller.
For best results, Apply when surface and ambient temperatures are above 13°C and below 32°C.
After completion of full coating, it should be allowed to cure for 24 hrs. Drying time may vary due to temperature / humidity and surface condition.