Damp Proofing

Product description:

This is a two component amine cured epoxy coating. It is a high solids primer specially designed for use onconcrete during the curing phase where the moisture content is still high. To be used as primer in atmospheric environments. Especially suited for properly prepared concrete substrates.

USES area

Specially designed primer as part of a complete system for a wide range of floors with various levels ofmechanical and chemical exposure. Recommended for warehouses, garages, dairies, factories, laboratories,aircraft hangars, food, beverage and plant rooms.

overlapping-coloured-block-modern-house-exterior-design-ideas
Exterior desihn

Surface preparation:

Concrete and Coated surfaces prepare the surface by means of enclosed blast shot or diamond grinding and other appropriate means to abrade the surrounding concrete and to remove laitance. Clean, dry and undamaged compatible coating

Application methods:

The product can be applied by
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to
achieve the specified dry film thickness.
Roller: Recommended

Features and Benefits

 Resists positive and negative water pressure.
 Suitable for interior and exterior use, above and below ground level.
 Water vapour permeable.
 High bond strength, becomes integral part of the substrate.
 To be mixed with water only.
 Can be brush or spray applied.
 Is applied onto a damp substrate.
 Equipment to be cleaned simply with water.
 Solvent free.
 Sika Damp-proofing Slurryhas been tested in accordance with WRAS (Water Regulations Advisory Scheme) BS6920 and is